Mikrotik RouterBOARD 911 with 600MHz Atheros CPU, 64MB RAM, 1x LAN, built-in 5Ghz 802.11a/n 2x2 two chain wir
Termékismertető
911 Lite5 dual
Perfect for building low cost CPE devices.
The RB911-5HnD is a small CPE type RouterBOARD wireless router with an integrated 5Ghz Dual Chain wireless card. It’s equipped with powerful 600MHz CPU, providing superb value for money.
Product specifications
Details |
Product code |
RB911-5HnD |
CPU nominal frequency |
600 MHz |
CPU core count |
1 |
Size of RAM |
64 MB |
Architecture |
MIPS-BE |
10/100 Ethernet ports |
1 |
10/100/1000 Ethernet ports |
0 |
MiniPCI slots |
0 |
MiniPCI-e slots |
0 |
Wireless chip model |
AR9344-DC3A-R |
Wireless standards |
802.11a/n |
Number of USB ports |
0 |
Power Jack |
0 |
802.3af support |
No |
Supported input voltage |
6 V - 30 V |
PoE out |
No |
PoE in |
Yes |
Voltage Monitor |
No |
PCB temperature monitor |
No |
CPU temperature monitor |
No |
Dimensions |
105x105mm |
Operating System |
RouterOS |
Operating temperature range |
-40°C .. +70°C tested |
License level |
3 |
Antenna gain DBI |
No |
Current Monitor |
No |
CPU |
AR9344-DC3A-R |
Max Power consumption |
7W |
SFP ports |
0 |
SFP+ ports |
0 |
Number of chains |
2 |
Serial port |
None |
Suggested price |
$45.00 |
Wireless specifications
5 GHz |
|
TX |
RX |
6MBit/s |
26 |
-96 |
54MBit/s |
22 |
-77 |
MCS0 |
26 |
-96 |
MCS7 |
21 |
-71 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Performance test results
RB911-5HnD |
AR9344 100M 1 port test |
Mode |
Configuration |
1518 byte |
512 byte |
64 byte |
kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
Bridging |
none (fast path) |
8.1 |
98.4 |
23.5 |
96.3 |
148.0 |
75.8 |
Bridging |
25 bridge filter rules |
8.1 |
98.4 |
23.5 |
96.3 |
87.6 |
44.9 |
Routing |
none (fast path) |
8.1 |
98.4 |
23.5 |
96.3 |
148.0 |
75.8 |
Routing |
25 simple queues |
8.1 |
98.4 |
23.5 |
96.3 |
106.6 |
54.6 |
Routing |
25 ip filter rules |
8.1 |
98.4 |
23.5 |
96.3 |
60.5 |
31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Hozzászólások